Saabscene Saab Forum - Saab Technical Information Resource banner

9-3 Interior door pulls

7K views 6 replies 6 participants last post by  turbosensonic 
#1 ·
How easy is it to replace the interior door pulls on the 9-3 with the silver ones found on the SE et al, and 9-5 ?
 
#3 ·
I remove the handles when I replaced the door speakers. It's pretty easy. Hardest job is making such the catch latches into the unlocking bar correctly: a bit of cord looped round the bar helped. I guess to change just the door handles would take me about 10 minutes each max.
 
#4 ·
Hello!

Replacing door pulls inside: piece of cake. The door pull is attached to the door with a torx screw.

You need a small screwdriver and a torx key.
First, prize out carefully the cover of the torx screw. Then open the torx screw and pull the door pull out of the door.

Put new door pull to its place. Make sure that the hook which is attached to the wire which leads to the lock is also in its place. Tighten the torx screw and press the cover of the torx screw in its place.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top