i am going to change my selector rubber, the thing that has 2 10mm bolts through it, as it has almost perished, and is making 1st-2nd change hard under load, i have put some cable ties around it at the moment to stop it from breaking completely, and my local saab dealer wanted £40, after i laughed and put the phone down, i am on this site to see if any one has sourced one from eleswhere, and if so do they do a polyurethane one.

http://www.saabscene.com/forum/images/smilies/rolleyes.gif all the best http://www.saabscene.com/forum/images/smilies/rolleyes.gif

teesside saab

Non Saab rubber joints are about £18.

There are 4*10mm nuts, and the studs are bonded into the rubber, adn the metal face plates are stuck top the rubber too.

I fitted one last week

Andrew

I also need one of these rubber links, whats your source, Andrew?