Hi

Keen to know if wheel this dimension will fit my 9-3.

SIZE:- 7.0Jx17"

PITCH CIRCLE DIAMETER:- 5/110

OFFSET:- ET49

CENTRE BORE:- 65.1MM




any feedback would be great,

Cheers

The offset is 8 mm too far inboard. It will narrow the track by 16mm and you may find the wheels rub on the inside of the wheel arch on full lock.

Standard offset for the 9-3SS is 41mm, but up to 35mm is OK, depending on wheel width.

Then again, You could get a 10mm spacer for each side and have a 4mm wider track. They should go on then.